|
|
| Video Clips |
| About Me |
| Links |
 |
|
|
 |
 |
|
|
The T-Rex 600CF has a
metal main rotor housing
with plastic main rotor
holders. The main rotor
holders have four high
quality ball bearings
and two thrust bearings
to assure smooth
movement on the
feathering shaft. The
flybar assembly has
eight ball bearings so
that the flybar seesaw
holder and metal flybar
control arm can pivot
smooth and effortless. |
||
|
Two lightweight carbon fiber main frame plates are screwed together with 44 screws. Aluminum screw washer’s ads to the quality, and looks well on the eye. Metal spacers, main shaft bearing bloks and brackets in the middle of the main frame makes the T-Rex 600 main frame very solid and strong. A metal motor mount houses the big RCM-BL600XL Align brushless motor. The T-Rex 600CF kit comes with
two sets of landing skids (normal
and 3D). The landing skids are
bolted to the bottom of the main
frame with four bolts and nuts. The
skid pipes are metal and have four
rubber landing skid nuts that
protect and prevent the metal skid
pipes from scratching. |
|
|
| Inside the tail boom mount, the tail drive gear runs on two high quality ball bearings. The tail boom mount is secured to the main frame with six screws. The tail boom slides into the tail boom mount, and is clamped secure with three bolts and nuts. Graphite tail boom braces gives the tail boom extra support. | ||
|
The rudder servo mount is made of carbon fiber. The rudder servo mounts, rudder linkage guides, horizontal stabilizer, vertical stabilizer and the tail rotor case are made from plastic. A strong tail rotor belt drives the tail rotor. The tail rotor assembly has two thrust bearings, two feathering shaft bearings and two tail rotor shaft bearings. |
|
|
|
The T-Rex 600Cf comes standard with
carbon fiber tail rotor blades. The high quality pre painted white and black glass fiber canopy fits securely onto the main frame the canopy have two rubber nuts the simply slides over the canopy mounting bolts. The bottom of the canopy has a pre cut hole in it for cooling of the ESC. The T-Rex 600 kits come with one sheet of stickers for the canopy and helicopter that need to be cut out by hand. That basically covers the quality and construction of the T-Rex 600CF. There is nothing negative that I can say about this helicopter. All thumbs up….
|
 |
|
|
|
||
