I have to say that this little helicopter is the best quality helicopter kit that I have ever build. No wonder Align is one of the leading R/C helicopter manufacturers in the world. All the parts are machined to the highest quality, perfection and materials. The all-metal main rotor head is a work of art, and all moving parts on the rotor head run on small ball bearings. A total of 14 high quality bearings in the main rotor head alone, assure for smooth operation and a solid main rotor assembly.

The 120º all metal swashplate have two ball bearings, and all ball joints on the swash plate are metal as well. The lightweight carbon fiber main frame gives the T-Rex 250 a rigid strong platform for the two main shaft bearing blocks, three servo’s, gyro, receiver, LiPo battery and main brushless motor.

The T-Rex 250 Super Combo kit is supplied with three Align DS410 digital servo’s that fits perfectly into the main frame. The three Align DS410 digital servo’s are for aileron, elevator and collective pitch control. The plastic main gear is driven with a RCM-BL250 Outrunner brushless motor, fitted with a metal 15 tooth pinion gear. This setup gives the T-Rex 250 more than enough power for any 3D maneuvers.

The plastic and metal tubing landing skids will handle any hard landing with ease. Four rubber landing skid nuts hold the landing skid metal tubes in place, and also prevent the metal tubing from scratching when operating on hard surfaces.

The supplied 15A Align speed controller fits neatly on to the side of the main frame using the supplied double sided tape. The speed controller is programmable, and can be programmed according to your preferences.

The supplied Align GP750 gyro sits below the tail boom inside the main frame. The Align GP750 gyro is a high quality 3D head lock gyro, and is also programmable. This gyro can be used on the T-Rex 250, T-Rex 450, T-Rex 500, T-Rex 600 and T-Rex 700.

My R6100e six channel Spectrum receiver sits below the main gear inside the main frame. All servo, speed controller and gyro wire leads run outside the main frame to the receiver. A few cable ties hold them neatly all together.

For a perfect center o gravity, the 11.1V 850mAh Align LiPo battery is situated on a battery tray in the helicopter nose. The supplied Velcro and battery straps keep the LiPo battery firmly in and won’t budge with the any 3D maneuvers.

The T-Rex 250 has a metal fly bar with plastic paddles. The main rotor blades are made of rigid plastic, and really show their strength when looked at the video clips on this website. The metal tail boom is firmly held in place in the tail boom mount inside the carbon fiber main frame. The supplied Align DS420 digital servo is mounted on the tail boom with rudder servo mounts.

The T-Rex 250 has an all metal tail rotor system, which gives the T-Rex 250 fast and accurate rudder response. Inside the tail rotor system, nine ball bearings make sure that everything runs smooth. Plastic tail rotor blades give plenty of power with rudder inputs. The horizontal and vertical stabilizers are made of carbon fiber and ads to the quality and looks of the T-Rex 250. A beautiful factory painted fiberglass canopy gives the T-Rex 250 a good overall look that will turn heads at your local flying club.